Packaging and Bundle

The Corsair Force GT is sold in a carton with dimensions of 135 X 110 X 30 mm and is characterized by a black and red color, as well as for the GT and GTX Dominator RAM Series memories. The graphics used for the packaging, apart the coloring, is very similar to that used in the Corsair Force 3 SSD. As with the basic version, in fact, even the GT version of the box has a picture of the SSD on the front, the message inherent the model in transversal direction on the right side and the characteristics of the disk in question at the bottom.

Specifically, among the features include the capacity, the connection used, the size of the SSD and the claimed performance in read and write.

 

In the package, in addition to the drive, there are the mounting screws and an adapter from 2.5" to 3.5" of black metalized color with the Corsair inscription and logo placed transversely, so as not to be covered once mounting the drive.

  

The SSD has a very aggressive design, thanks to the red color of the cover. The sticker, placed on the body, shows us the serial number of the model, the product key and the drive capacity. The bottom has a black color that will go very well with many enthusiast motherboards on the market today, but also with the Corsair GT and GTX RAM. The bottom features two warranty stickers placed on two edges and four small screws to disassemble the drive, removing them you will have access to the PCB.

     

On the PCB is easily recognizable the SandForce SF-2281 chip, the same used for the Corsair Force 3 series, and the 16 NAND memory modules used (8 per side) in 4 rows of 4 modules each. The modules used are branded Micron and their code is 29F64G08CBAAB, unlike those used for the Corsair Force 3 changes the last letter from B to A. Overall, the PCB is clean enough, although all components are installed on a very small board.

Video Unboxing

http://www.youtube.com/watch?v=eS6EqjWJas8